Below are the steps required to reset a Speco Silver Recorder to factory settings.
- First, access the Setup menu of the Speco Silver Recorder.
- You may be required to insert the username and password.
- Once the Setup menu appears, please select the Maintenance option under the System tab.
- On the left side of the screen, and option called Load Default can be found. Select Load Default.
- Select the options that need to be reset. It is recommended to choose Select All if the whole unit needs to be reset.
- Select Apply in the bottom right corner of the screen.
- A pop-up will appear asking for admin credentials. Please insert the admin username and password. Once accepted, the recorder will reset itself and reboot.
- Select the options that need to be reset. It is recommended to choose Select All if the whole unit needs to be reset.
PLEASE NOTE - A factory default will reset the entire recorder unit to its default factory settings. Any previous setting changes will be lost.
The unit's recorded data will remain untouched.
Initial Publish Date: May 14, 2024
Published by: Frank Bondietti