This guide will go over the steps required to enable Motion Detection on a Blue series recorder.
If you don't have the system set up locally online, please refer to the article first:
How to Connect to a Speco Blue Recorder from a Computer.
If this step has already been completed please continue to step 1.
Step 1:
- Connect to the recorder locally using its IP address,
- for example: http://192.168.1.100.com, then hit enter
- A login screen should present itself.
- Insert the username and password of the recorder, select Login.
Step 2: Click on Settings
Step 4: Click on Record
Step 5:
- Make sure mode is set to Auto, and Motion Record is enabled.
Initial submission Date: November 26, 2024
Article authored by: Phil Benanti, Tier 2