There may be instances where you do not want the recorder to assign the IP address to the camera.
1. Log into the NVR
2.Click settings, then system. This will bring you to Basic Settings
4 Click on POE Settings, this menu will populate
5. Click on the PoE Plug-and-Play Settings and choose the channels you want to turn off.
6. After disabling the plug and play, go the network setting , Internal ethernet port and change the address .unfortunately once this done you will need to statically address the camera with and IP address other then 192.168.78.(x)
Initial Publish Date: April 12th, 2024
Published by: Evan Wills, Tier 1 & Frank Bondietti, Tier 1