This guide goes over the steps required to change which ports are running IP or Analog on a Hybrid series Speco Blue Recorder.
- First, access the Settings menu of the Hybrid Speco Blue Recorder.
- Once the settings menu appears, please select the option for Camera. That will automatically open the Edit Camera page.
- At the Edit Camera page, at the top, there is an option for Camera Signal. Please select Camera Signal. This will pull up the page.
- The Camera column lists the designated port number that can be adjusted.
- The Analog/IP column determines which signal the port is assigned to, this option changes the port from an Analog channel to an IP channel or vice versa.
- The recorder unit is set up to detect the format type of the analog signal. Manual adjustment may be required.
- Once the desired settings are set, select Apply at the bottom of the page.
The ports should now be configured to run either IP cameras or Analog cameras.
When configuring the H40HR, only ports 25-32 are adjustable
Initial submission Date: July 23, 2024
Article Authored by: Frank Bondietti