After setting the analytic the recorder, you will have to configure the camera.
Schedule Digital Deterrent
- Find the IP address of the white light camera with SecureGuard CMS or Speco Blue Scanner. <---- Where do they find this , make an article!!)
2. Type in the camera's IP address and log in with the username and password. The default username is admin, and the password is 1234.
3. Click on the configuration tab as shown below.
4. Click on “Video/Audio” setup and click on audio and check of enable as shown below.
5. Click on “event” from the sidebar.
6. Choose the analytic you configured on the recorder. Choose the checkboxes for “Enable” and for target detection, trigger audio alarm, and trigger light alarm.
7. Click on the “schedule” tab and create a schedule for the digital deterrent. When done, click save.
